Zamzuri Noh
MFC-7840W
MFC-7360N
MFC-8480
( TN360 Toner Cartridge )
Follow the instructions below:
Step 1 – Open the front cover of your Brother MFC-7840W/MFC-7360N/MFC-8480 where you can access its toner cartridges.
Step 2 – Press the Clear/Back button and wait till its screen showed a dialogue “Replace DRUM? 1. Yes 2. No”
Step 3 – Do not type in 1 or 2, instead type in *00 on the keypad and then it will show the word “accepted”.
Step 4 – Close the front cover of your printer, thus it is now reset and you can continue working on your print jobs.
Now the last thing to do is to close the front door/panel, and allow your printer to initialize for a moment or so.
If everything work out just fine, your toner counter is successfully reset.
Computer Devices
1 comment:
If this doesn't work, you need to remove the toner cartridge and look on the left side of the cartridge. There will be a small white or black tab that is rotated all the way to the right. Rotate it all the way to the left. If it won't move, you will need to remove the end of the cartridge by removing the 3 small phillips head screws. Once that is done, remove the white gear by pinching the tab and pulling the gear off. Now rotate the tab to the left. Put the cartridge back together. Go through the reset procedure again. This should work.
Post a Comment