Saturday, November 1, 2014

How to Determine Ram Type

Computer Devices

Recent edits by: Connor, Maluniu, G34rs0fw4rrr

Consumers interested in upgrading or installing RAM (random access memory) may want to determine the RAM type currently installed in their computers. This can be difficult to accomplish without going inside the computer case and actually removing a memory stick to view the desired information. Although there are some freeware applications available for download from the Internet that can determine the memory type installed on your computer, some users may choose to retrieve the information from the memory stick itself. In this article you will learn several methods for determining which type of RAM is installed on your system.

Remove a Memory Stick to Determine RAM Type

1. Prepare your computer to remove a memory stick.
Power down your computer and turn off the power switch located on the back of your computer case, near the power cord socket.
Remove the case door and locate the memory slots on the motherboard. The slots, which are approximately 4.5 to 5 inches (10 to 12 cm) long, typically will be lined up in a row of 4 to 8. Depending on amount of RAM installed on your system and the number of memory slots on your motherboard, some of the slots may be empty.

2. Remove a memory stick to obtain the RAM information.
Choose a memory stick on the outside edge of the row of slots that seems easiest to access. Notice that there are 2 plastic tabs situated on either side of each memory slot.
Place your thumbs squarely onto the tabs on either side of the memory stick you wish to remove, and press down firmly but gently. The memory stick will rise partially from the memory slot. Grasp the memory stick between your thumb and forefinger and pull it out the rest of the way.

3. Write down the information printed on the side of the memory stick and reinsert.
Document the name of the manufacturer and the memory type information.
Reinsert the memory stick by lining it up with the slot, then press down, applying equal pressure on each end with your thumbs. The tabs on either side of the slots will rise up and lock into place. Replace the case door and turn on the power switch.

Perform a Live System Scan to Determine RAM Type

1. Download and install an application to determine the RAM type or run a live system scan.
Some of the major manufacturers now provide free, live scans that can determine the RAM specifications for most systems. Visit the website of your preferred manufacturer and run the available online scan to determine your system's RAM information.

Refer to Your System's User Manual or Contact Tech Support to Determine RAM Type

1. Refer to the documentation included when you purchased your system to determine the RAM type.
Often times this information will be included in the operating manual or on a separate spec sheet.

2. Contact technical support.
If your service contract is not expired, contact technical support to obtain your systems hardware and memory specifications. Consult a support technician to determine the RAM type installed on your computer.

Tip

When removing RAM from your computer, be sure to take note which direction the memory stick is facing so you can easily replace it once you have gathered the required information.

Warning

When working inside your computer case, the use of an electrostatic wrist guard is advised. This will reduce the potential for an electrostatic discharge, which can cause critical damage to system components. Electrostatic wrist guards can be purchased for under $20 from a computer or electronics retailer.

Sources and Citations

http://www.emergingtechs.com/posts/determine-memory-type-without-opening-the-computer/
http://en.wikipedia.org/wiki/Motherboard#Peripheral_card_slots

Computer Devices

LinkWithin

Related Posts with Thumbnails